Rosemount 1056 dual-channel liquid analysis transmitter, pH/ORP, conductivity, chlorine, DO, ozone, turbidity, HART or Profibus DP
Pricing depends on specification, quantity and delivery location. Send your requirement and we reply with a costed quotation within 24 hours.
Quick overview
- Type: Analyser / transmitter
- Signal / Protocol: 4–20 mA, HART, PROFIBUS, Relay / switch
- Hazardous area: Hazardous-area rated / option
- Genuine productsSourced from the manufacturer or authorised channels
- Delivery across BangladeshDhaka, Chattogram and all industrial zones
- After-sales supportInstallation guidance and warranty handling
- Reply within 24 hoursCall +880 1713 552466 or email hello@argonmark.com
Specifications
| General | |
|---|---|
| Part no. | BD-1609 |
| Category | Liquid Analysis (pH, ORP & Conductivity) |
| Group | Instrumentation & Control |
| Brand | Rosemount |
| Model | 1056 |
| Technical | |
| Type | Analyser / transmitter |
| Signal / Protocol | 4–20 mA, HART, PROFIBUS, Relay / switch |
| Hazardous area | Hazardous-area rated / option |
Datasheet
Technical features
| Two independent liquid analytical measurements in one ½ DIN transmitter | |
| Field-replaceable signal input boards, auto-recognised at power-up | |
| Quick Start programming at first installation or after a factory reset | |
| Large back-lit graphic display shows both measurements plus temperature and diagnostics | |
| Automatic pH buffer recognition for faster calibration | |
| On-board concentration curves for common acids and bases on conductivity boards | |
| Automatic recognition of Pt100 or Pt1000 temperature elements in the sensor |
Applications
| Water and wastewater treatment | |
| Boiler feedwater and steam/condensate monitoring | |
| Industrial process liquids | pulp & paper, chemical, food & beverage |
|---|---|
Power
| Option 01 | 115 V AC ±15%, 60 Hz or 230 V AC ±15%, 50 Hz; 10 W; no relays (not for turbidity) |
|---|---|
| Option 02 | 20–30 V DC, 15 W, with 4 relays |
| Option 03 | 84–265 V AC, 47–63 Hz switching, 15 W, with 4 relays |
Approvals
| Hazardous locations (not with Profibus DP) | Class I Div 2 Groups A–D; Class II Div 2 Groups E–G; Class III; T4A, Tamb 50 °C |
|---|---|
| Ordinary locations | UL listed (UL option) |
| EMC / safety | EN 61326; EN 61010-1 (LVD) |
Key specifications
| Inputs | 1 or 2 independent channels: pH/ORP/ISE, contacting or toroidal conductivity, free/total chlorine, dissolved oxygen, ozone, turbidity, flow/current |
|---|---|
| Outputs | 0/4–20 mA (programmable to any measurement or temperature); HART or Profibus DP |
| Relays | 4 configurable alarm relays, SPDT 5 A (power options 02 and 03) |
| Power | 115/230 V AC (no relays), 20–30 V DC or 84–265 V AC switching |
| Enclosure | Polycarbonate, Type 4X / IP65, ½ DIN, panel, wall or 2 in pipe mount |
| Approvals | Class I/II Div 2 (CSA/FM option); UL ordinary locations option |
Measurements
| Channels | 1 or 2, independent and isolated |
|---|---|
| Measurement boards | Contacting conductivity, toroidal conductivity, pH/ORP/ISE, flow/current input, chlorine, dissolved oxygen, ozone, turbidity |
| Temperature compensation | Automatic, Pt100 or Pt1000 RTD in the sensor |
Outputs & communication
| Analog outputs | 0/4–20 mA, assignable to any measurement or temperature |
|---|---|
| Digital communication | HART or Profibus DP (option) |
| Alarm relays | 4 × Form C SPDT, epoxy sealed, interval timer settings |
| Relay rating (resistive) | 5 A at 28 V DC, 115 V AC or 230 V AC |
| Inductive load | 1/8 HP motor max. at 115/230 V AC |
Housing & environment
| Enclosure | Polycarbonate, Type 4X, IP65 |
|---|---|
| Dimensions | 155 × 155 × 131 mm |
| Conduit openings | ½ in or PG 13.5 |
| Display | Back-lit monochrome graphic LCD, 128 × 96 pixels, 3.8 in diagonal |
| Ambient temperature | 0 to 55 °C (0 to 50 °C with turbidity) |
| Storage temperature | −20 to 60 °C |
| Relative humidity | 5–95%, non-condensing |
| Weight | 1.5 kg (shipping 2.0 kg) |
| Mounting | Panel, wall or 2 in pipe (kits available) |
Notes
| Data from the manufacturer's published datasheet. Confirm model, range, materials and approvals with Argonmark before ordering. |
Description
The Rosemount 1056 is a line-powered, dual-channel transmitter for liquid analysis. Each of its two isolated channels takes a plug-in measurement board for pH/ORP/ISE, contacting or toroidal conductivity, chlorine, dissolved oxygen, ozone, turbidity or a flow/current input, so one ½ DIN unit can handle two different measurements.
It provides 0/4–20 mA outputs with optional HART or Profibus DP, and with the 24 V DC or universal AC power options it adds four 5 A alarm relays. The polycarbonate Type 4X/IP65 housing mounts on a panel, wall or 2 in pipe, and Quick Start programming with automatic board recognition keeps commissioning short.
Argonmark Ltd supplies Rosemount instruments across Bangladesh — to pulp and paper mills, water and effluent treatment plants, chemical, textile, food and power plants in Dhaka, Chattogram, Gazipur, Narayanganj and beyond. Send us the model, measuring range, process connection, wetted materials and output you need, and we will confirm the right configuration, lead time and price.
Questions & answers
Customer questions
No questions asked yet. Ask about specification, compatibility, lead time or anything else about this item.
Reviews
No reviews yet. Bought or used this item? Be the first to share your experience.
-
Pressure transmitter, 4-20mA/HART, gauge/absolute
Price on request
-
Differential pressure (DP) transmitter
Price on request
-
Pressure gauge, bourdon, SS, 63/100/150mm dial
Price on request
-
Pressure switch, adjustable
Price on request
-
Temperature transmitter, RTD/TC input, HART
Price on request
-
RTD sensor Pt100, with thermowell
Price on request